-
Failed To Import Sliced Model
-
Foot Pad Deformation
-
Light Curing Print Model Cannot Adhere/Easily Falls Off
-
Model not adhering to the platform/Model detachment
-
Opaque Printing Screen
-
Print With Vertical Stripes
-
Printing Red Wax Resin Non-Stick Platform
-
Screen Error "There is a problem with this model data!"
-
Screw Rod Abnormal Noise
-
The Feeding Module Is Not Feeding The Material
-
The Machine Does Not Print/Printing Is Unsuccessful
-
The Model Being Printed Has Internal Voids Or Holes
-
The Model Solidification Is Complete With White Objects On The Surface
-
The Print Job Freezes Right At The Start
-
The Printed Model Has A Stair-Step Pattern
-
The Printed Model Has Layer Lines
-
The Touch Screen Display Is Incomplete
-
The Touch Screen Doesn't Light Up
-
The Transparent Resin Printed Comes Out Slightly Yellow
-
The UV Light Remains On Even After Turning Off The Clear Screen Or Completing The Print
-
UV Light Not Illuminated
-
Using The Halot BOX For Remote Printing Prompts To Enter The Token Code
-
Warped Print Model
-
Z-Axis Motion Noise
-
Zeroing And Leveling Abnormalities
-
The Build Platform Emits Abnormal Noises During Vertical Movement
-
Unable To send Sliced Model Through HALOT BOX
-
Z-axis Abnormal Noise
-
Printed Model Damaged, Incomplete
-
Unable To Detect WiFi Signal
-
USB Drive Import Of Print Model Failed
-
Touch Screen Unresponsive
-
Slicer Software Issue
-
Print Misalignment
-
Print Non-Stick Platform
-
LAN Printing Cannot Find Printer
-
There Are Defects On The Surface Of The Model
-
When Leveling The-platform Did Not Respond After Shutting Down You Can Manually Turn It Down