¶ 1. Phenomenon Description
Printing red wax resin non-stick platform
¶ 2. Cause Analysis
Printing operations and printing parameter issues
¶ 3. Troubleshooting
- Print a random model, stir the resin before printing and ensure the vat is free of impurities.
- If the random model print fails, check the leveling condition. Operation: Place an A4 paper on the print screen, click the leveling function, wait for the print platform to press down on the A4 paper, the four corners withdraw from the A4 paper, if it can be pulled, it means it needs to be retightened. After re-leveling, print a simple model for a test.
- After all the above adjustments are normal:
Lower the print speed to below 3mm/s, the bottom layer exposure time is 50s, the exposure time is 2.2s, and the light-off delay is 6s (The exposure time is for reference only, it needs to test the model to determine whether the resin is at the optimal exposure time).