¶ 1. Phenomenon Description
"There is a problem with this model data!" error occurs when printing using LAN
¶ 2. Cause Analysis
- Incorrect printer model selected during model slicing
- Wrong printer model selected for local network printing after model slicing completion
¶ 3. Troubleshooting
- When using the slicing software, check if the corresponding printer model has been selected.
- After the model slicing is completed, check if the corresponding printer model has been selected for LAN (Local Area Network) printing.
- Copy the model to the USB flash drive for printing. If the model can be printed, then the wrong corresponding printer model was selected during LAN printing. If the model still produces an error during printing, then the wrong corresponding printer model was chosen when using the slicing software.