The machine does not print/Printing is unsuccessful.
- Problems caused by non-exposure or leakage of the printing screen
- Firmware issues
- Failure to level the printing platform results in resin not adhering to the platform
- Resin issues
- Caused by external temperature conditions
- Remove the material vat and printing platform, place a sheet of white paper on the print screen, and run a blank test to check if the exposure is functioning properly.
- Upgrade to the latest firmware.
- Use the small plastic scraper from the accessories to scrape the bottom of the vat to check for cured resin.
- Filter the resin again. Check if the resin has expired.
- If the ambient temperature on-site is too low, it can affect the activity of the resin.