¶
General Troubleshooting
Print With Vertical Stripes
The Touch Screen Display Is Incomplete
Using The Halot BOX For Remote Printing Prompts To Enter The Token Code
Z-Axis Motion Noise
The Machine Does Not Print/Printing Is Unsuccessful
Warped Print Model
Light Curing Print Model Cannot Adhere/Easily Falls Off
The Print Job Freezes Right At The Start
The UV Light Remains On Even After Turning Off The Clear Screen Or Completing The Print
Zeroing And Leveling Abnormalities
The Printed Model Has Layer Lines
Screen Error "There is a problem with this model data!"
Failed To Import Sliced Model
The Model Solidification Is Complete With White Objects On The Surface
The Model Being Printed Has Internal Voids Or Holes
Printing Red Wax Resin Non-Stick Platform
The Transparent Resin Printed Comes Out Slightly Yellow
The Printed Model Has A Stair-Step Pattern
Unable To send Sliced Model Through HALOT BOX
Z-axis Abnormal Noise
Printed Model Damaged Incomplete
Unable To Detect WiFi Signal
USB Drive Import Of Print Model Failed
Touch Screen doesn't Light Up
Touch Screen Unresponsive
¶
General Other Documents
Print Misalignment
Print Non-Stick Platform
LAN Printing Cannot Find Printer
There are Defects On The Surface Of The Model
When Leveling the-platform Did Not Respond After Shutting Down You Can Manually Turn It Down
¶
ONLY APPLIED TO Halot Mage Pro & Halot Mage
Model not adhering to the platform/Model detachment
UV Light Not Illuminated
Opaque Printing Screen
The Touch Screen Doesn't Light Up
Screw Rod Abnormal Noise
The Feeding Module Is Not Feeding The Material
Foot Pad Deformation
The Build Platform Emits Abnormal Noises During Vertical Movement
Slicer Software Issue