¶950104: Foreign Object Detected on the Build Plate. Print Paused.
¶950762: The Extruder Strain Gauge May Be Damaged or the Nozzle Wiper Module May Have Come Loose. Check the Printer or Try Restarting It.
¶950939: Filament in the Current Slot Has Run Out. Please Load New Filament.
¶951302: Extruder Clog Detected. Check for Filament Tangles, a Nozzle Clog, or Incomplete Filament Loading. Resolve the Issue and Tap Retry.
¶951303: Filament not fully loaded. Manually push the filament forward, or check for filament tangles or a nozzle clog. Once the issue is resolved, tap Retry.
¶951304: Filament in Slot %s Has Run Out. Load New Filament.
¶970200: No microSD Card Detected. Related Features Are Temporarily Unavailable. Insert a microSD Card.
¶970201: No microSD card detected. Please insert a microSD card.
¶CZ2768: Z-axis homing issue, may have an external disturbance
¶FB2944: Feeding Abnormal, Filament Odometer Normal but the Filament Sensor in the Extrusion Assembly Has Not Been Triggered for an Extended Period, the PTFE Tube May Be Disconnected
¶FR2939: Filament Depleted in Slot, Please Insert Filament Promptly
¶FO2971: Pre-Loading Filament Abnormal, Timeout When Feeding Filament to the Designated Position. Please Resolve the Issue and Tap "Retry"
¶FR2949: Filament Unloading Abnormal, Filament Cannot Retract to the Toolhead Manifold. Please Resolve the Issue and Tap "Retry"
¶FO2970: Filament Unloading Abnormal, Feeding Motor Stalled, Filament Cannot Exit the Extruder
¶FB2964: Feeding Abnormal, Buffer Not Reaching Full Limit, Filament May Be Ground
¶FB2947: Buffer Stuck at Empty Limit, Filament May Be Tangled
¶FR0122: External Spool Filament Detected During Use