¶ i8 Printer (Standalone device)
- i8 Printer¹
8 GB microSD card (pre-installed in the printer)
0.4 mm stainless steel nozzle (pre-installed in the printer)
- Double-sided gold-colored textured PEI build plate
- 2.0 mm hex key
- 2.5 mm hex key
- Scraper blade
- Power cord
- Sample filament, 10 m
- Spool Holder²
- PTFE tubes, 80 cm × 2
- PTFE tubes, 60 cm × 2
- SPARKX i8 Quick Start Guide
- Disclaimer and Safety Guidelines
¶ i8 Printer¹
Includes:
- i8 gantry
- i8 base
- M4 × 34 heated bed base screws × 10
- M3 × 8 base side screws × 4
Note: In some regions, the i8 is supplied as a kit and requires assembly. Follow the instructions in the Quick Start Guide.
¶ Spool Holder²
Includes:
- Main brackets × 2
- Connecting bridges × 2
- Spool support cylinders × 4
- Push-fit fitting connectors × 4
- Sliding clips × 2
- Spool holder mounting screws:
- M3 × 6 screws × 4
- Shoulder screws × 4
Note: Assemble the spool holder according to the Quick Start Guide.
¶ Accessory
| Accessory | Description |
| i8 Printer | Main printer unit. |
| 8 GB microSD card (pre-installed) | Stores print files, time-lapse files, and other data. |
| 0.4 mm stainless steel nozzle (pre-installed) | Compatible with the QuarTeks™ four-channel quick-release hotend. Its standard 0.4 mm diameter is suitable for everyday printing. |
| Double-sided gold-colored textured PEI build plate | Supports printed objects and provides a flat surface for print adhesion. Both sides can be used. |
| 2.0 mm and 2.5 mm hex keys | Used to assemble or maintain the printer and its accessories. |
| Scraper blade | Used to make a scraper. Print the scraper handle included among the printer's built-in models, then assemble it with the blade. The scraper helps remove prints from the build plate. |
| Power cord | Supplies power to the printer. |
| Sample filament | Hyper PLA sample filament. |
| Spool holder | Mounts near the rear sides of the printer after assembly and holds up to four filament spools at once. |
| PTFE tubes: 80 cm × 2; 60 cm × 2 | Connect the push-fit fittings on the spool holder and toolhead to guide the filament. |
The types and quantities of included accessories may change. Please refer to the actual items received.