SPARKX i7、i8
Possible causes include:
- A printed part, filament residue, or another object has been left on the build plate.
- Filament scraps or other debris are present beneath the heated bed or on the transfer plate.
- The build plate is not seated correctly.
- The detection system triggered a false alarm.
- Check the build plate. Remove the build plate and check for printed parts, filament residue, or other foreign objects on its surface. Remove any debris.
- Check beneath the heated bed and the transfer plate. Remove any fallen filament scraps or other foreign objects.
- Check the build plate installation. Make sure the build plate is installed correctly and that the heated bed can move freely.
- Retry the check. Tap Retry to run the check again.
- Contact customer support. If no foreign objects are found on the build plate or in the heated bed's movement area but the warning keeps appearing, contact customer support.
1. Check the build plate.
- Remove the build plate and check for printed parts, filament residue, or other foreign objects on its surface.
- Remove any foreign objects.
2. Check the heated bed and its movement area.
- Check beneath the heated bed and on the transfer plate for fallen filament scraps or other foreign objects.
- Remove any foreign objects and make sure nothing obstructs the heated bed's movement.
3. Check the build plate installation.
- Make sure the build plate is installed correctly and sits flat against the heated bed.
- Make sure the build plate is not lifted, misaligned, or otherwise improperly installed.
4. Retry the operation.
- Once the issue has been resolved, tap Retry.
- Check whether the printer returns to normal operation.
5. Contact customer support if the issue persists.
If no foreign objects are found on the build plate or in the heated bed's movement area but the warning keeps appearing, contact customer support.