The CFS lite status indicator lights are located on the Filament Buffer of the four channels. During use, the light status can be observed through the black translucent top cover.
The CFS lite is powering on
The CFS lite is connecting to the printer
The CFS lite is idle, and no filament is loaded in any of the four channels
The filament in this channel has been loaded and pre-feeding is complete.
The filament in this channel is currently in use
The filament in this channel is currently being pre-fed
The printer is printing, and the filament in this channel has been depleted.
After inserting new filament, the status will return to normal.
The connection between the CFS lite and the printer is abnormal. Check whether the CFS 6-pin Cable 1m between the CFS lite and the printer is properly connected.
The filament status of this channel is abnormal, including:
Feeding timeout
Unloading timeout
Odometer reading does not reach the expected value
Motor stall during feeding or unloading
Filament tangled in this channel
Other similar abnormalities
At this time, check the printer error pop-up and follow the corresponding Wiki guide to troubleshoot both the printer and the CFS lite.