PrusaSlicer Adaptation
¶ PrusaSlicer Adaptation
¶ 1. software download
¶ 1.1 software download
Download address of the latest version of PrusaSlicer: https://www.prusa3d.com/page/prusaslicer_424
¶ 2. installation process
¶ 2.1 installation process
¶ 2.1.1 download to desktop:
¶ 2.1.2 All the way Next, finally Finish:
¶ 3. parameter import
¶ 3.1 parameter import
Import the PrusaSlicer configuration file that has been adapted in advance for different models of creality into the software.
¶ 3.2 Summary of relevant historical configuration files for prusa adaptation of Creality 3D models:
GO And Download configuration file
Cura Adaptation
¶ Cura Adaptation
¶ 1. software download
¶ 1.1 software download
cura5(5.3.0) version download link:
https://github.com/Ultimaker/Cura/releases/tag/5.4.0
¶ 2. Installation process
¶ 2.1 Installation process
Click to run the .exe file, and then refer to the normal software installation guide, all the way to Next.
¶ 3. Parameter import
¶ 3.1 Parameter import
¶ 3.1.1 Add printer (custom model docking)
We can find the target model or similar model as the initial model among creality's printer varieties, and then customize and improve it.
¶ 3.1.1.1 Entrance 1
¶ 3.1.1.2 Select the existing Creative 3D model, or choose the universal model Ender3s1
¶ 3.1.1.3 Rename the target machine to Creality 3D: such as K1, K1-MAX
¶ 3.1.1.4 Just configure the target machine to the correct size, and synchronize the starting and ending gcode
¶ 3.1.1.5 Start and end G-code table list by model (retain line breaks):
¶ 3.1.2 import cura configuration file
Import the cura configuration file that has been adapted for different models of creality into the software.
¶ 3.1.2.1 In the operation drop-down box on the right sidebar, click Manage Configuration Files:
¶ 3.1.2.2 Click the import button to upload the cura configuration files adapted to different models of creality:
¶ 3.1.2.3 After the import is successful, we find this configuration file, select it, and click the fold button on the right:
¶ 3.1.2.4 Click to activate the configuration file to take effect:
¶ 3.2 Summary of relevant historical configuration files for cura adaptation of Creality 3D models:
GO And Download configuration file
¶ 4. Profile Form
| Models | Sizes | Configuration Files (Prusa) | Configuration Files (Cura) | Start G-code (retain newlines)(Cura) | End G-code (retain line breaks)(Cura) |
|---|---|---|---|---|---|
| K1 | 220x220x250 | prusa-k1-config.ini | cura_k1_pla.curaprofile |
M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} |
END_PRINT |
| K1C | 220x220x250 | prusa-k1c-config.ini | cura_k1c_pla.curaprofile |
M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} |
END_PRINT |
| K1 Max | 300x300x300 | prusa-k1max-config.ini | cura_k1max_pla.curaprofile |
M140 S0 M104 S0 START_PRINT EXTRUDER_TEMP={material_print_temperature_layer_0} BED_TEMP={material_bed_temperature_layer_0} |
END_PRINT |
Refer to the table, unzip and find the target configuration file:
prusa.zip
Orca adaptation
#OrcaAdaptation
¶ Orca Adaptation
¶ 1. Software download
¶ 1.1 Software download
OrcaSlicer version download address: https://github.com/SoftFever/OrcaSlicer/releases
¶ 2. Installation process
¶ 2.1 Installation process
Click to run the .exe file, then follow the normal software installation instructions and click Next.
¶ 3. Import parameter configuration
¶ 3.1 Import K1 series 3MF project files separately
We can import the prepared K1 series machine model, consumables, and process engineering files (3mf) into OrcaSlicer.
¶ 3.1.1 Entrance
¶ 3.1.2 Select the 3MF file and click to open
¶ 3.2 After the import is successful, we can switch to K1, K1C, and K1Max models for slicing.
¶ 3.3 OrcaSlicer 3MF project file download for K1 series models:
© 2014-2023 Shenzhen Creality Technology Co., Ltd. All Rights Reserved
Feedback email: kefu@creality.com