This status prompts that the firmware has stopped working after receiving stop requests.
The printer is shut down due to a request from an external system or service via a webhook. Webhook is a way for an external service to communicate with the Klipper, usually for monitoring or controlling devices. This error indicates that some kind of automation service or external system may have detected the problem and requested that the Klipper be stopped to prevent further failure or damage.
Another error caused this message, so you need to check the reason for the previous error
An external service monitors an exception, such as a high temperature, unexpected printer behavior, or a system resource problem (such as insufficient memory).
Some monitoring tools or plug-ins may issue incorrect shutdown requests.
The firmware is configured with some automation rules. When certain conditions trigger, the webhook will ask to shut down the printer.
Since the XS2001 error occurred, the firmware has stopped working, and the machine needs to be restarted after processing.
Go to the error code history page, view the non-XS error codes before XS2001, and then go to the corresponding error code page to view the solution.