This is a comprehensive error message that has been broken down into more detailed error codes.
This prompt indicates that an abnormality occurred during the feeding process, preventing the filament from being fed normally. Specific reasons include:
Filament spool tangled or jammed: The material on the filament spool may be knotted or caught by other objects, affecting the feeding.
Filament stuck in the extruder or hub outlet: The filament may be stuck in the internal structure of the extruder or hub outlet, obstructing normal feeding.
Check the filament spool: Confirm whether the filament spool is tangled or jammed, and straighten the material if necessary.
Check the extruder and hub outlet: Observe if there is any filament blockage in the extruder and hub outlet, and address it promptly.
Click the "Retry" button: After resolving the abnormality, click the "Retry" button to attempt feeding again.
Check the filament spool status: Ensure that the filament spool is not knotted or caught by other objects.
Check the extruder and hub outlet status: Confirm that there is no filament blockage in the extruder and hub outlet.
Click the "Retry" button: After resolving the abnormality, click the "Retry" button to attempt feeding again.