This prompt indicates that the leveling sensor may experience external interference during the Z-axis return to zero
Check interference sources: Check the environment around the printer to ensure that no objects or devices interfere with the normal operation of the leveling sensor.
Check the connection: ensure that the wiring of the leveling sensor is stable to prevent interference caused by poor contact.
Check whether there are any objects or devices around the printer that may interfere with the sensor.
Ensure that the cables to the leveling sensor are securely connected.
If the problem persists, try repositioning the sensor to reduce interference.
Restart the device, click the Z-axis homing, and observe whether the normal operation is restored.