K1 Max
The prompt indicates that there is a problem during the AI LiDAR calibration process, which may be caused by a dirty liDAR camera or a failed or non-compliant calibration model print.
Clean the camera: Inspect and clean the surface of the LiDAR camera to ensure that there is no dirt or obstacles.
Check the calibration model: Confirm that the calibration model was successfully printed and meets the calibration requirements, such as size and shape.
Re-print calibration model: If there is a problem with the model, re-print the calibration model that meets the requirements.
Check the liDAR camera to make sure its surface is clean.
Verify that the calibration model is successfully printed and meets the requirements.
Reprint the calibration model to ensure it meets requirements.
Try the LiDAR calibration again