K2 Plus
This prompt indicates that the waste material in the waste chute accumulates too much, resulting in blockage in the chute, which affects the normal operation of the machine and the print quality. This prompt does not pause printing
Clean the waste chute: Open the waste chute, check and clean the waste in it to ensure that it is clear.
Check the waste discharge system: confirm that the waste discharge system is working properly and there is no other blockage.
Check the waste chute to see if there is any obvious blockage or accumulation of waste.
Clean the waste chute and make sure there are no obstructions.
Check the waste discharge pipe to make sure it is smooth.
After the clearing is complete, restart the printing task to resume normal operations.