K1C/K1 Max/K2 Plus
This prompt indicates that serious warping of the model is detected during the printing process, which may affect the print quality, so the system automatically suspends the printing.
Check the model for warping, if so, adjust the print Settings (such as improving the first layer adhesion or checking the temperature parameters) and then restart the print.
In case of occasional false, the sensitivity can be adjusted to "normal" in the AI function Settings or AI detection can be turned off.
If frequent false occurs, enter the Settings - Camera - AI function to reduce sensitivity or turn off AI detection.
Check the print model for warping.
Adjust relevant print Settings, such as first layer adhesion and temperature parameters.
If the problem persists, resend the printing task.
Adjust AI detection sensitivity Settings as required.