K2 Plus
This prompt indicates that the Settings for the current print file do not support flow proportional calibration, so the system will automatically use the default print parameters. This is usually due to file format or slicing Settings that do not meet the requirements for flow ratio calibration.
Check file format: Ensure that the print file format supports traffic proportional calibration. It is recommended to slice by using CrealityPrint 5.0 or later or Orcaslicer 2.0 or later.
Modify the slicing Settings: Adjust the Settings in the slicing software, ensure that the flow proportional calibration function is enabled, and re-slice the file.
Re-upload files: If there is a problem with the file itself, consider recreating or modifying the file to support traffic proportional calibration.
Step 1: Check whether the current printed file is using the recommended slicing software.
Step 2: Adjust the Settings or re-slice the file to ensure that it supports flow proportional calibration.
Step 3: After finishing slicing, restart the print task.