K1 Max
This function is used to detect failure or quality issues in the first layer print. When the first layer detection is turned on, the printer will use liDAR to scan the first layer after printing it to check whether the printing effect of the first layer meets the expectations
First layer print quality problems may include printing material adhesion failure , warping or excessive extrusion of material, affecting subsequent printing.
If frequent false occurs, the sensitivity of AI detection can be adjusted to the normal setting or the AI function can be turned off.
Plate coated white or using a special pattern of plate may result in false detection.
Check if there are obvious defects in first layer printing, such as material adhesion failure, warping, etc. If you find a problem, clean the printing platform and restart printing.
If the frequent false occurs, go to Settings - Camera - AI function - First layer detection and disable First layer detection.