K1C/K1 Max/K2 Plus
False trigger case: If you think you can continue printing after manual judgment, you can click "Continue printing" at any end of the printer screen, slicing software or Creality Cloud.
Printing failure: If the printing failure is confirmed, clean the printer and print again.
disable function: In system Settings, navigate to Camera > AI Function to disable the detection function.
If the error occurs, select "Continue printing" to resume the printing process.
Check the cause of the printing failure and clean the inside of the printer to ensure that there is no material residue or debris.
If needed, turn off AI detection to avoid false positives.
Step 1: Check the pop-up prompt to confirm the status of the print quality problem.
Step 2: Decide whether to continue printing or re-print according to the actual situation.
Step 3: If you confirm the printing failure, clean the printer and ensure that there is no debris.
Step 4: If necessary, adjust system Settings, turn off AI detection function or reduce detection sensitivity.