K2 Plus
This prompt is triggered by the waste accumulation detection system to monitor the waste accumulation when CFS automatically changes the printing filaments during the printing process. When the waste chute blockage is detected, the system automatically suspends printing to prevent the waste accumulation from causing damage to the printer.
Check the waste chute to make sure there is no waste accumulation. If you find waste, please clean it up in time.
After cleaning, restart the printing task.
If this problem occurs frequently, consider adjusting the sensitivity of waste detection. Go to the Setting - AI function, select General or professional sensitivity, and check or uncheck Fault Pause printing as needed.
Step 1: Pause printing, check the pop-up prompt, confirm whether the waste chute is blocked.
Step 2: Clean the waste chute and make sure there is no accumulated waste.
Step 3: Check if there are other factors causing waste accumulation, such as print settings or filament issues.
Step 4: After cleaning, click "Retry" to continue printing.