Q： What slicing software should be used for the PioNext Mini?
A： Please use Piocreat Box (version v4.6.1.4133 or higher), PioNext Box, or Chitu Dental for slicing. Chitubox is currently not supported.
The minimum system requirements for Piocreat Box are as follows:
Q： How do I adjust printing parameters (exposure time, layer height, etc.)?
A： Different resins require different parameters. Please refer to the following link: PioNext Mini printing parameters
Q： Can Piocreat Box or PioNext Box set different parameter configurations for different resin materials?
A： Yes. In the parameter page of the slicing software, you can create and save independent configurations such as exposure time and lift speed for each resin, making it easy to recall them as needed.
Q： If the model is relatively large and heavy, can small supports be used?
A： Not recommended. For large or heavy models, medium or large supports must be used to ensure reliability. Additionally, it is strongly recommended to hollow the model and properly design drain holes to reduce pull forces and save resin.
Q： After slicing, does the exported STL file contain resin printing parameters and support parameters?
A： No. The STL file exported from the slicing software contains only geometric model data. All resin printing parameters and support structure information are saved in the .cxdlpv4 format file generated by the slicer. Furthermore, when exporting an STL, the original supports become fused into the model and cannot be edited further.
Q： What should I do if importing a sliced model from a USB drive fails?
A：
Q: Is there a dedicated cleaning machine compatible with PioNext Mini? A: You can use the Mini Wash ultrasonic cleaner matched for PioNext Mini. Use 95% alcohol or isopropanol for cleaning with a cleaning duration of 3 to 6 minutes.
Q: I’m using Chitubox slicing software but cannot find PioNext Mini in the device list. How to solve this issue? A: Chitubox V1.2.0 and later versions support configuration for PioNext Mini. Please update the software from Chitubox official website. Alternatively, PioNext Box is available for free download for your slicing work.
Q: Can you provide parameter packages (.cfg or .machine files) for Chitubox? A: Printing parameters for PioNext Mini are preinstalled in Chitubox V1.2.0 and above; parameters are available right after adding the corresponding machine model. If you adopt third-party resin, parameters need manual debugging.
Q: What does shrinkage compensation parameter mean and how to adjust it? A: Shrinkage compensation is designed to counteract the volumetric shrinkage of resin after curing by pre-scaling up model dimensions in software. Adjustment steps inside Piocreat Box:
Q: Are printing parameters available for resins from other brands such as Detax and Formlabs? A: We have established cooperation with several resin manufacturers and offer recommended parameters for mainstream brands including Bego and Keystone; please check PioNext Mini Printing Parameters document. Contact technical support with exact resin brand and model to obtain relevant parameter sheet. For non-cooperative third-party resins, precise preset parameters are unavailable, but the Third-party Resin Calibration Guide is provided for self-debugging.
Q: Is there all-in-one pre-parameterized software for plug-and-play use?
A: PioNext Box V1.9 and newer versions embed full parameter library for all PioNext series resins. Simply open Printer settings within software to one-click apply preset parameters like exposure time and lifting speed. Besides, commonly-used resin options are preloaded in machine firmware for quick selection.
Q: How long is the valid term of license key for Chitubox Dental Edition?
A: The authorization is valid for 3 months.
Q: Where can I download the latest dental slicing software?
A: Official download center: https://www.piocreat3d.com/software/