¶ Resin Parameter for DJ 89PLUS
¶ These parameters are based on laboratory conditions (room temperature 23±2℃, humidity 50%±20%). Due to individual variations in each device and differences in usage environments, fine-tuning may be required to achieve optimal printing results.
| Image | Resin type |
Layer Thickness /mm |
Initial Exposure time /s |
Exposure Time /s |
Lift Up Height /mm |
Motor Speed mm/s |
Delay Off Light /s |
Initial Exposure Layers |
|---|---|---|---|---|---|---|---|---|
 |
Ortho Model Resin | 0.05 | 35 | 2.7 | 8 | 3 | 1 | 3 |
 |
Ortho Model 2.0 Resin | 0.05 | 30 | 2.5 | 8 | 3 | 1 | 3 |
 |
Water Washable Model Resin | 0.05 | 30 | 1.9 | 8 | 3 | 1 | 3 |
 |
Removable Die Model Resin | 0.05 | 35 | 2.8 | 8 | 3 | 1 | 3 |
 |
Surgical Guide Resin | 0.05 | 50 | 5 | 8 | 3 | 1 | 3 |
 |
Surgical Guide Resin Pro | 0.05 | 40 | 6 | 10 | 2 | 1 | 3 |
 |
Splint Resin | 0.05 | 40 | 6 | 10 | 2 | 1 | 3 |
 |
Splint Flex Resin | 0.05 | 40 | 6 | 10 | 2 | 1 | 3 |
 |
Crown and Bridge Resin | 0.05 | 45 | 3.2 | 8 | 3 | 1 | 3 |
 |
Temporary Restoration Resin | 0.05 | 45 | 3.2 | 8 | 3 | 1 | 3 |
 |
Ceramic Crown Resin | 0.05 | 35 | 2.3 | 8 | 1 | 3 | 3 |
 |
Gingiva Resin | 0.05 | 45 | 3.6 | 8 | 3 | 1 | 3 |
 |
Try-in Resin | 0.05 | 40 | 3.8 | 8 | 3 | 1 | 3 |
 |
Denture Base Resin | 0.05 | 40 | 4.5 | 8 | 3 | 1 | 3 |
 |
Clear Aligner Resin | 0.05 | 55 | 6 | 9 | 2 | 2 | 3 |
 |
Dental Casting Resin | 0.05 | 45 | 4.2 | 8 | 3 | 1 | 3 |
 |
Castable High Wax Resin | 0.05 | 70 | 8 | 8 | 3 | 1 | 3 |
 |
Castable Wax Resin - Black | 0.05 | 35 | 5.5 | 8 | 3 | 1 | 3 |
 |
Castable Wax Resin - Blue | 0.05 | 70 | 6.5 | 8 | 3 | 1 | 3 |