¶ Troubleshooting
¶ Problem Description:
The level sensor's sensitivity is set too low. As a result, the machine continues the feeding process even after the resin has reached the proper level in the tank, leading to overflow.
¶ Solution:
-
Power Off the Machine: Disconnect power to prevent resin from contaminating electrical components or the screen.
-
Clean the Spilled Resin:
- Wear gloves.
- Use paper towels to absorb and remove the liquid resin.
- Clean any remaining residue with isopropyl alcohol (IPA) before it cures and becomes difficult to remove.`
-
Inspect Key Components: Check the FEP film, LCD screen, and guide rails for any contamination or damage. Clean or replace parts as necessary.
-
Increase Level Sensor Sensitivity: Refer to the provided instructional images or diagrams to correctly adjust and increase the sensitivity setting of the level sensor.
