1.The parameters are for reference only.
Different engraving effects can be achieved by modifying the parameters.
2.Place a flat object that cannot be penetrated by the laser (such as aluminum alloy or stainless steel plate that under the material) when cutting.
| Processing Mode | Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
| Engraving | Linden plywood | 2 | 81 | 1500 | 1 |
| Kraft paper | 0.2 | 2600 | 1 | ||
| Red card paper | 0.2 | 4300 | 1 | ||
| Orange card paper | 2300 | 1 | |||
| Yellow card paper | 2300 | 1 | |||
| Green card paper | 2300 | 1 | |||
| Cyan card paper | 1200 | 1 | |||
| Blue card paper | 1200 | 1 | |||
| Purple card paper | 3900 | 1 | |||
| Red asphalt felt | 0.8 | Engraving is not recommended but cutting is recommended (such as window grilles). |
|||
| Orange asphalt felt | |||||
| Yellow asphalt felt | |||||
| Green asphalt felt | |||||
| Cyan asphalt felt | |||||
| Blue asphalt felt | |||||
| Purple asphalt felt | |||||
| Cutting | Kraft paper | 0.2 | 81 | 200 | 1 |
| Red card paper | 0.2 | 200 | 1 | ||
| Orange card paper | 1 | ||||
| Yellow card paper | 1 | ||||
| Green card paper | 1 | ||||
| Cyan card paper | 1 | ||||
| Blue card paper | 1 | ||||
| Purple card paper | 1 | ||||
| Red asphalt felt | 0.8 | 400 | 1 | ||
| Orange asphalt felt | 1 | ||||
| Yellow asphalt felt | 1 | ||||
| Green asphalt felt | 1 | ||||
| Purple asphalt felt | 1 | ||||
| Cyan asphalt felt | 200 | 1 | |||
| Blue asphalt felt | 150 | 1 | |||