Configuration File：/creality_falcon_a1c.lbdev
1. Select [Devices] to enter the device page
2. Select 【Import】 to import the LightBurn configuration file
3. Select to provide the "Creality Falcon A1C.lbdev" configuration file
4. Open
5. Select the imported Creality Falcon A1C device
6. Select [OK] to confirm
7. Confirm whether the device is selected as the 【Creality Falcon A1C】 device
8. After selecting the correct COM port, the command bar of LightBurn will prompt device information, indicating a successful connection;
1. Determine whether the machine starts up normally and whether the CH340 driver is installed
2. Ensure that the Type-C port of the data cable is inserted into the computer Type-C port on the Creality Falocn A1C machine
3. If you are unsure about the COM port, you can plug and unplug the device to check for updates, or check through the computer's [Device Manager].