When you insert the TF card, the relevant information will be saved to the TF card if the machine is abnormal. The following information is about the error code, and you can find related solutions from https://www.youtube.com/playlist?list=PLW9O3eZmo5E0t4dIL9EK1NQ6LlqroyJP8. You can contact Creality customer service if the problems still cannot be solved.
Notes: Open the log file with “txt”
ERROR:01
The angle data is abnormal and it has stopped working. Please check whether the workbench is shaking, the screws are locked tightly and the frame of the machine is firmly.
ERROR:02
There is no GCode file in the root directory of the TF card. Please check whether the suffix of the file in the TF card is ".gcode/.gc/.nc", and ensure the file is saved in the root directory.
ERROR:14
The temperature of host CPU is too high. Please check whether the ambient temperature is too high. It is recommended to wait for the host to cool down to a suitable temperature before working.
ERROR:24
The machine is in an unsealed state. Please close the protective cover and drawer, and then press the start button of the device to continue working.
ERROR:25
The air pump is abnormal. Please contact the after-sales service for relevant technical support