¶ Notes
1. Do not use the printer in any way other than described herein iin order to avoid personal injury or property damage;
2. Do not place the printer near any heat source or flammable orexplosive objects. We suggest placing it in a well-ventilated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;
4. Please use recommended filaments to avoid clogging of the exttrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which acconipanies the printer;
6. Do not touch the nozzle and the heated during operation tto avoid burns or personal injury;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
8. Use the provided tools to clean the filament from the extruder iin time taking advantage of the residual temperature after printingg. Do not touch the extruder directly when cleaning, otherwise it may caause burns;
9. Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded print filament and foreign objects on the guide rails;
10. Children must be accompanied by an adult at all times when uusing or near the printer;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligaations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any circumstance;
12. Tip: Do not pluq in or unpluq wires on a chargedbasis.
¶ 1. Printer Information
¶ 1.1 Packing List
¶ 1.2 About the Printer
¶ 1.3 Equipment Specifications
¶ 1.4 Equipment Size
¶ 2. Unboxing
¶ 2.1 Remove the lead screw rod holders and heat bed locking screws
¶ 2.2 Install Accessories
¶ 2.2.1 Install Printer Screen
¶ 2.2.2 安装机器料架及铁氟龙管
¶ 2.3 Connecting CFS
¶ 2.3.1 Install the filament buffer
¶ 2.3.2 Connect the PTFE tube and 485 cable
¶ 2.4 Connecting Multiple CFS
¶ 2.5 Power-on Guide
¶ 3. Product Usage
¶ 3.1 User Interface
¶ 3.2 Loading Filament From Spool Holder
¶ 3.3 Loading Filament From CFS
Users who have not purchased CFS can skip this step.
To avoid filament spool getting stuck, do not use cardboard spool with untreated edges or cardboard spool that are deformedI as a whole;
¶ 4. First Use
¶ 4.1 Filament Setup
¶ 4.2 Print
¶ 4.3 Creality Print Slicing
¶ 4.3.1 Software Download and Installation
¶ 4.3.2 Bind Machine to LAN
¶ 4.3.3 Slice and Send to Print
¶ 4.4 Creality Cloud Printing
¶ 4.4.1 Software Download and Installation
¶ 4.4.2 Bind and add a device
Use the Creality Cloud app on your mobile phone to scan the QR code on the printer screen and bind the printer to your account.
¶ 5. Tips and Routine Maintenance
¶ 5.1Lubrication and maintenance
¶ 5.2 Maintenance Items
