K2 Plus is equipped with an intelligent time-lapse function, suitable for recording and sharing every exciting moment of the printing process.
¶ Features:
- Intelligent generation: The machine automatically generates time-lapse videos after printing is completed
- High resolution: 1080P video quality
- Video format: mp4 format, H.264 encoding
¶ Operation guide:
¶ 1. Enable/ disable the function:
The machine is enabled by default, no operation required;
To disable the function, go to Settings > General> Camera > Enable time-lapse photography Off
 |
|
¶ 2. View and export via Creality Cloud App:
|
|
|
|
|
¶ 3. View on machine screen and save to USB drive:
 |
 |
 |
 |
¶ 4. View and export via slicer software on the local network
On the bound machine page, scroll down to find the time-lapse Video option, check the file, and click export.
¶ FAQ
¶ Where is the K2 Plus time-lapse camera?
The K2 Plus time-lapse uses the chamber camera, located on the upper left side frame of the machine
¶ Why are there no time-lapse video files in my machine?
It may be due to insufficient model layer height. Models with less than 30 layers will not have time-lapse video files; Time-lapse captures a frame of video at the start position of each layer during model printing. K2 Plus video files have 30 frames per second, and videos less than 1s will not be generated.
It may be that the machine firmware has abnormally closed the time-lapse service for some reason. This can be resolved by restarting the machine.