¶ 1. Replace nozzle wiper
¶ 1.1 Tool
H2.0 Hex Wrench
New nozzle wiper
¶ 1.2 Operation Steps
Remove
Straighten the hitch/linchpin and remove it.
Remove the rotation shaft and waste shield.
Use the H2.0 hex wrench to remove the 2 M3 screws (located on the inner side of the waste chute)
Remove the damaged wiper.
¶ 1.3 Installation Steps
Place the new nozzle wiper on the right side of the waste chute, with the threaded holes facing outwards.
Use the H2.0 hex wrench to install the 2 M3 screws (on the inner side of the waste chute)
Place the waste shield underneath the wiper , align the holes and insert the rotation shaft.
Insert the hitch/linchpin and bend it to secure.
¶ 2. Replace wiper adhesive tape
¶ 2.1 Tool
New wiper adhesive tape
¶ 2.2 Operation Steps
Remove
Peel off the old damaged adhesive tape from the nozzle wiper.
¶ 2.3 Installation Steps
Remove the protective backing.
Attach the new adhesive tape onto the nozzle wiper base.
¶ Video Tutorial
Replace Nozzle Wiper
https://youtu.be/nx0PoI67fOM