¶ 1. Lower the Machine's Hot Bed
Operate the screen to lower the machine's hot bed to the bottom, and re-tighten the hot bed plate to the machine's base shell by using the three screws of the hotd bed.
¶ STEP1: Operate the machine to lower the hot bed to the maximum position
¶ STEP2: Use the hot bed's fixing screws to tighten it.
¶ 2. Tilt the Machine and Remove the Four Buffer Foot Pads
¶ 3. Use a 2.0 hex wrench, remove the 6 M3*10 screws from the bottom shell, open the base plate and unplug the 3P2.5 terminal connectors
¶ 4. Use a 2.5mm hex key. Remove the two M3^20 round head screws. Push firmly in the direction of the arrow by hand.Tighten the two M3^20 round head screws
