¶ 1. Phenomenon Description
The Y-axis front end gap is different. When the Y axis returns to homing, the sound is greater than the X axis homing sound.
¶ 2. Cause Analysis
2.1. Frame deformation
2.2 The two belt lengths are different
¶ 3. Troubleshooting and Solution
3.1 Measure the Frame
Use an L-square to measure whether the frame is 90 degrees
3.2 Check the belts
- A. Compare the length of the two belts and turn them to the same length if they are not consistent (refer to the after-sales video K1 MAX to replace the X and y axis timing belts)
https://www.youtube.com/watch?v=mHyS-xtsnzM
- B. Check whether the number of exposed teeth on both sides of the belt's Press Plate is consistent. If they are not consistent, reinstall them (refer to the picture).
