¶ Dear Users
Thank you for choosing our products. For the best experience, please read this User Manual carefully and strictly follow the instructions to operate the printer. Our teams will always be ready to provide you with the best services. Please contact us via the phone number or e-mail address provided at the end of this User Manual when you encounter any problem with the printer. For a better experience in using our products, you can also learn how to use the printer in the following ways: Accompanied instructions: you can find the relevant instructions and videos on the USB flash disk.
You can also visit our official website (https://www.creality.com) to find information regarding software, hardware, contact information, device instructions, device warranty information, and more.
¶ NOTES
-
Do not use the printer in any way other than described herein in order to avoid personal injury or property damage;
-
Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool and dustless environment;
-
Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;
-
Please use recommended filaments to avoid clogging of the extrusion head and causing damage to the machine;
-
Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which accompanies the printer;
-
Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury;
-
Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
-
Use the provided tools to clean the filament from the extruder in time taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
-
Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded print filament and foreign objects on the guide rails;
-
Children under 10 years old should not use the printer without supervision, otherwise it may cause personal injury;
-
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any circumstance;
-
Tip: Do not plug in or unplug wires on a charged basis.
¶ 1. About the Device
¶ 1.1 About the Printer
¶ 1.2 Device Specifications
¶ 1.3 Packing List
¶ 2. Unboxing
¶ K1 Max_Operation Video：https://youtu.be/fcfT_iS6GL0
¶ 2.1 Unpacking Steps
Take the packing cotton and tools in the order as shown in figure.
¶ 2.2 Install the Product
¶ 2.3 Power-on guide
¶ 3. About the User Interface
¶ 3.1 Tune、Prepare
¶ 3.2 Files
¶ 3.3 Tune、Support
¶ 4. First Printing
¶ 4.1 Local Printing
¶ 4.2 LAN Printing
¶ 4.3 CrealityCloud printing
¶ 5. Functional Specification
¶ 5.1 Extrude、Filament Retreat
Extrude
¶ 5.2 Calibration
¶ 5.3 AI function
- When AI detection is turned on, the chamber camera will monitor the process of printing. If any defect is found during the printing, a window will pop up to remind you.
- When you check the Push Pause Printing, the printing will pause if there is any printing defect.
¶ 5.4 Self-inspection
¶ 5.5 Network Settings
¶ Maintenance
¶ Routine Maintenance
¶ 1. Precautions for printing
¶ 1.1 Lubrication and maintenance
¶ 1.2 Use and maintenance of flexible platform
In the event that any of the above problems arise and cannot be resolved:
① Please visit https://www.crealitycloud.com/product, click “Products" and select the right model,
and then click “Related" to view the tutorials on after-sales service;
② Or contact our after-sales service center at +86 755 3396 5666, or send e-mail to cs@creality.com
¶ 2. Maintenance Items
¶ 3. Installation of Damping Pads
Since each model is different, the actual product may be different from the picture. Please refer to the actual product. The final interpretation right belongs to Shenzhen Creality 3D Technology Co., Ltd
¶ Tips
If any of the problems arise and cannot be resolved，
Please visit https://www.crealitycloud.com/product, click “Products" select the right model, and then click “Related" to view the tutorials on after-sales service;
Or directly contact our after-sales service center via online service channels (See How to get Creality service) .