Q： What is the approximate service life of the LCD（UV masking screen）, UV lamps, and release film?
A： Under normal usage and proper maintenance:
Note: Actual lifespan may vary depending on operating environment and user habits.
Q: How can I delete files stored in the printer?
A: You cannot directly delete historical print files. However, importing a new file will overwrite the one stored on the mainboard.
Q: What UV wavelength is compatible with?
A: It is designed for 405 nm UV resin.
Q: What is the standard printing speed ?
A: The standard printing motor speed is 3 mm/s.
Q: How can I reduce resin odor during printing?
A: Resin odor is common when opening the lid after printing. To minimize it:
Q: Is printing noise normal?
A: Yes. Cooling fans and Z-axis movement generate noise during printing, which is normal.
Q: Printing fails in low temperatures, and the model does not adhere to the build plate.
A: Poor adhesion can be caused by resin being too cold. Please try the following: Avoid printing in very low ambient temperatures. The recommended printing temperature is 30 °C.
Q: Why does my finished model look whitish or feel sticky?
A: This usually means the model was not fully cleaned during post-processing. Wash it again in 95%+ alcohol to ensure no residue remains. After proper cleaning, the model surface should be clear and non-sticky.
Q: Can HALOT BOX set different parameter profiles for different resin?
A: Yes. In HALOT BOX’s param select page, you can customize different parameters for each resin.
Q: For large and heavy models, can I use small supports?
A: No. Large models require Heavy supports.
For bulky models, it is recommended to hollow them and add drainage holes.
Q: When slicing process reaches the Export step, if I go back to Model step and export the STL file, will it include resin printing parameters and supports parameters?
A: No. The exported STL does not include resin settings or supports settings. The supports will be converted into part of the model geometry and cannot be edited.