¶ 1. Step One
Loosen and remove the four screws on the bottom shell by using a Phillips screwdriver.
¶ 2. Step Two
Unplug the UV lamp power cord and remove the bottom shell.
(Note: Do not tear the UV lamp power cord when removing the bottom shell.)
¶ 3. Step Three
Take a picture of the cable connection. Remove all cables on the adapter board, loosen two screws, and take out the adapter board.
¶ 4. Step Four
Replace the adapter plate with a new one, fasten the two screws, and connect the cables on the adapter plate.
¶ 5. Step Five
Install the bottom shell back on the machine, connect the UV lamp power cord, and tighten the four screws of the bottom shell
