It is recommended to apply lubricating grease to the X-axis every 9-12 months;
Depending on usage conditions, first clean the old grease from the guide rails using lint-free paper or tissue paper;
Then apply small amounts of grease multiple times to the surface of the guide rails, while manually sliding the X-axis to distribute the grease evenly.
It is recommended to apply lubricating grease to the Y-axis every 12-18 months;
Depending on usage conditions, first remove the hot bed, then clean the old grease using lint-free paper or tissue paper;
Clean both Y-axis optical shafts thoroughly, then apply small amounts of grease multiple times to the surface of the optical shafts, while manually sliding the Y-axis to distribute the grease evenly.
