Click to Level, The machine reboots when it returns to the lower left corner after homing/The device reboots immediately after the machine preheats.
- 2.1 The voltage setting does not meet the local standard for overseas users.
¶ 3. Troubleshooting and solution
- 3.1 Before powering on, please adjust the voltage to meet the local standard.
- 3.2 Please disassemble the base plate and check if there are any loose connections with the power supply and motherboard.
- 3.3 Please heat the nozzle separately/heat the hotbed separately, and check if the machine will restart, if unable to heat the nozzle and heat bed simultaneously,Check if the machine will reboot.
- After checking the above steps, if the problem still cannot be solved, please contact after-sales service cs@creality.com