The model shows layer lines.
- 2.1 The print head is wobbling.
- 2.2 Belt Loosen
- 2.3 X-axis motion stuttering
- 2.4 Hotend kit loosening
- 2.5 Parameter abnomaly
¶ 3. Troubleshooting and solution
- 3.1 Adjust the eccentric nut on the X-axis.
- 3.2 Re-adjust the tension of the belt.
- 3.3 Check if the pulley/profile is damaged, unlock the motor and move the X-axis to check for any jamming issues.
- 3.4 Check if the screws fixing the nozzle assembly are loose.
- 3.5 Check if the printing parameters was modified, such as acceleration, outer wall speed, etc., you can test the Gcode files in supplementary file (In the memory card come with machine).