¶ Phenomenon description
The printed model has abnormal problems such as stringing/lack of filament/infill
¶ Cause analysis
-
Actual printing materials do not match the slicer settings; for example, using non-Hyper PLA, but having selected Hyper PLA material parameters for slicing.
-
Feeding is not smooth.
-
Extruder component anomaly.
¶ Troubleshooting and solution
- If using non-Hyper materials, select generic materials - for example, Generic-PLA; it is recommended to use Hyper materials.
- Note: Using general-PLA parameters for third-party consumables cannot guarantee the best printing results, and you need to debug them yourself.
-
Check whether the Teflon tube is deformed, causing difficulty in feeding.
-
Check the extruder gears for wear and damage.Extruder Abnormality / Extruder Jam / Extruder Abnormal Noise