Thank you for choosing Creality. For your convenience, please read through this User Manual before you start and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To further improve your
user experience, you can find more about our devices via the following methods:
User manual: You can find instructions and videos in the USB flash disk provided with the printer.
You can also visit our official website (https://www.creality.com) to find information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
- You can upgrade the firmware directly through the device socreen;
- You can upgrade the firmware via the Creality Cloud OTA;
- Please visit the official website https://www.creality.com, click on"Support - Download Center", select the corresponding model to download the required firmware, (Or click on Creality Cloud → Downloads → Firmware"), after installation is complete, you can use it.
- You can log in to the Creality Official Wiki (https://wiki.creality.com) to explore more detailed after-sales service tutorials.
- Or contact our after-sales service center at +86 755 33396 5666, or send e-mail to cs@creality.com.
- Do not use the printer in any way other than described herein in order to avoid personal injury or property damage;
- Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, cool and dustless environment;
- Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;
- Please use recommended filaments to avoid clogging of the extrusion head and causing damage to the machine;
- Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which accompanies the printer;
- Do not touch the nozzle and the heated bed during operation to avoid burns or personal injury;
- Do not wear gloves or wraps while operating the machine to prevent entrapment of movable parts that could cause crushing and cutting injuries to bodily parts;
- Use the provided tools to clean the filament from the extruder in time taking advantage of the residual temperature after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
- Clean the printer frequently. Clean the printer body with a dry cloth regularly after powering off the printer, wipe away dust, bonded print filament and foreign objects on the guide rails;
- Children under 10 years old should not use the printer without supervision, otherwise it may cause personal injury;
- Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any circumstance;
- Tip: Do not plug in or unplug wires on a charged basis.
https://youtu.be/r43rVJXojas
① Install the material rack and material barrel according to the diagram;
② Align the installed material rack component holes with the locking positions to the immediate right of the gantry frame and secure them downwards smoothly.
Place the gantry frame assembly into the slots on the base:
A. First, use four M4x8 screws to align and secure the left and right screw holes on the base;
B. Then, use four M4x8 screws to align and secure the screw holes on the bottom of the base.
① First, use two M4 × 10 screws to align the holes on top of the gantry
and lock the screws;
② Then, use two M4 × 10 screws to align the holes on the base and lock
them all.
① Connect the touchscreen to the base screen using the flexible flat cable;
② Snap the buckle on the back of the touch screen into the slots on the base.
¶ 4 About the Power-on Guide and User Interface
¶ 5.2.1 Software download and installation
Log in to the website to download Creality Print 5.0 or higher slices:
https://www.crealitycloud.cn/software-firmware/software/creality-print;
¶ 5.2.3 Slice and send for printing
Method 1: Manual retract
Method 2: Auto retract
¶ 7 Equipment Maintenance
¶ 7.1 Platform plate removal and maintenance
¶ 7.2 Optical axis maintenance
It is recommended to purchase lubricating grease for regular maintenance of the optical axis area.