Answer: The overall dimensions of the Ender-3 V3 Neo are:
Standalone version: 545.44 × 369.5 × 470.5 mm
Combo version: 545.44 × 369.5 × 470.5 mm; CFS nano: 360 × 230 × 348 mm
Answer:
|
Ender-3 V3 Neo International Version Packaging Specifications
|
|||
|---|---|---|---|
| Kit Shipment | Packaging Dimensions (L×W×H) | Product Net Weight (KG) | Complete Package Gross Weight (KG) |
| Ender-3 V3 Neo（Standalone） | 495 x 465 x 280 mm | 7.7 | 9.68 |
| Ender-3 V3 Neo Combo | 495 x 465 x 280 mm | 9.54 | 11.88 |
|
Ender-3 V3 Neo Domestic Version Complete Machine Packaging Specifications
|
|||
| Ender-3 V3 Neo（Standalone） | 455*465*530mm | 7.7 | |
| Ender-3 V3 Neo Combo | 455*465*530mm | 9.54 | |
Answer: Typical speed: 300 mm/s; Maximum print speed: 500 mm/s; Maximum acceleration: 8,000 mm/s²
Answer: Maximum nozzle temperature: 300°C; Maximum hot bed temperature: 100°C
Answer: Recommended filaments include PLA, PETG, 95A TPU, and 90A TPU. (ABS and ASA require an enclosure for printing; the recommended hot bed temperature is 90°C.)
Answer: The standard nozzle is 0.4 mm. Compatible nozzle sizes include 0.2 mm, 0.6 mm, and 0.8 mm.
Answer: Using Hyper-PLA as an example: after enabling height-based and weight-based speed reduction, the top layer speed is approximately 150 mm/s. (Actual speeds may vary for other filaments.)
Answer: The standard platform load capacity is 2 KG.
Answer: No. The Ender-3 V3 Neo Combo comes standard with CFS nano and does not support CFS or CFS Lite.
Answer: No. Since TPU is a flexible filament, it is prone to curling and jamming during feeding. Therefore, TPU is not supported for use with the CFS nano, and multi-color TPU printing is not possible.
Answer: Yes. It supports filament resumption printing with the same type and same color of filament.
Answer: TPU printing parameters for the Ender-3 V3 Neo:
0.4 mm nozzle, 0.2 mm layer height:
HP-TPU: Maximum volumetric flow rate speed 2, print speed approximately 7 mm/s
90A TPU: Maximum volumetric flow rate speed 1.5, print speed approximately 5 mm/s
Answer: Open the filament selection menu, select "Add Filament," and check the relevant TPU filament options.
Answer:
Before printing, check whether the filament has absorbed moisture. If it has, dry the filament according to the recommended settings for the filament type.
Before slicing, configure the filament settings accordingly. Refer to Question 2 for filament setup and ensure the correct filament parameters are selected.
Pay attention to the model orientation and avoid placing models in positions that require excessive overhanging supports.
Before feeding, check that the filament setting on the device is set to TPU to avoid using incorrect filament parameters during feeding, which could cause a clogged nozzle due to excessive extrusion speed.
TPU filament is only supported for printing in standalone mode.
Answer: Yes, it comes standard with a camera capable of recording time-lapse photography.
Answer: No filament is included as a gift.
Answer: Yes. https://vip.creality.com/zh/goods-detail/2359