Overall machine print dimensions
Answer: The Ender-3 V3 Mega overall machine dimensions are 590×588×697.5mm (without spool holder) and 590×588×883.61mm (with spool holder). It is recommended to reserve approximately 1 square meter of space for placement at home.
Product packaging dimensions, net weight, and gross weight
Answer:
Ender-3 V3 Mega Packaging Specifications
| Kit | Packaging Dimensions (L×W×H) | Product Net Weight | Packaged Gross Weight |
| Ender-3 V3 Mega (standalone) | 739 × 670 × 385 mm | 21.2 kg | 26.5 kg |
| Ender-3 V3 Mega Combo (bundle) | 739 × 670 × 385 mm | 23 kg | 28.5 kg |
Standard print speed
Answer: Typical speed is 300mm/s, maximum print speed is 500mm/s, maximum acceleration is 8000mm/s².
Printing temperatures
Answer: Maximum nozzle temperature is 300°C, maximum hot bed temperature is 100°C.
Recommended printing filaments
Answer: Recommended filaments include PLA, PETG, 95A TPU, 90A TPU, and 85A TPU. (ABS and ASA require an enclosure for printing; recommended hot bed temperature is 90°C.)
What nozzle sizes are currently supported?
Answer: The standard configuration includes a 0.4mm nozzle, with compatibility for 0.2mm, 0.6mm, and 0.8mm nozzles.
Is there height-based speed reduction and weight-based speed reduction? What is the top layer print speed after reduction?
Answer: Using Hyper-PLA as an example: after enabling height-based speed reduction and weight-based speed reduction, the top layer speed is approximately 150mm/s. (Speeds for other filaments are subject to actual conditions.)
What is the maximum load capacity of the print platform?
Answer: The standard platform load capacity is 6 kg.
Is CFS supported?
Answer: Yes. The Ender-3 V3 Mega Combo comes standard with CFS nano compatibility, and is also compatible with CFS. CFS lite is not supported.
CFS connection method: Refer to the Ender-3 V3 Mega CFS installation instructions.
Does the standard CFS nano support TPU, and can it be used for multi-color TPU printing?
Answer: No. Since TPU is a flexible filament, it is prone to curling and jamming during the feeding process. Therefore, TPU is not supported for use in the CFS nano, and multi-color TPU printing is not possible. (The same applies to CFS.)
Is there an automatic filament refill function?
Answer: Yes. It supports automatic filament refill printing using the same type and color of filament.
Does the automatic filament refill module support TPU?
Answer: No. Since TPU is a flexible filament, it is prone to curling and jamming during the feeding process. Therefore, TPU is not supported for use in the automatic filament refill module.
Does the Ender-3 V3 Mega Combo include an automatic filament refill module?
Answer: The Combo does not include an automatic filament refill module. Since the CFS nano itself can already perform the automatic filament refill function, there is no need to configure one separately.
TPU print speed
Answer: TPU printing parameters for the Ender-3 V3 Mega:
0.4 nozzle, 0.2mm layer height:
How do I set TPU printing parameters?
Answer: Open the filament selection menu, select "Add Filament," and check the relevant TPU filament options.
Precautions for Printing TPU
Answer:
Before printing, please check whether the filament has absorbed moisture. If the filament is damp, it needs to be dried according to the filament type;
Before slicing, the filament settings need to be configured accordingly. You may refer to Question 2 for filament settings, and please select the correct filament parameters;
Pay attention to checking the model orientation to avoid printing with excessive overhanging supports; Before feeding the filament, please check whether the filament settings on the device are set to TPU filament, to avoid using other filament parameters for feeding, which may cause a clogged nozzle due to extrusion being too fast;
The TPU filament spool must be placed on the ball bearing side to avoid print failure caused by excessive resistance when pulling the filament;
1. What cameras are compatible with the Ender-3 V3 Mega?
Answer: It supports the Nebula camera;
2. Does the purchased device kit include filament?
Answer: No filament is included as a gift.
3. Is there a corresponding insulation cover available for purchase?
Answer: Yes,