¶ 1. Phenomenon Description:
The model or the part of the model does not stick to the platform
¶ 2. Cause Analysis:
¶ 2.1 slight non-stick problem
If there is a slight non-stick problem, it may be that before leveling, the nozzle's or platform's left filaments resulting in inaccurate height.
¶ 2.2 The Tilted X-axis
The X-axis is tilted, resulting in partial non-sticking of large-size models.
¶ 2.3 Abnormal Height's Adjutment Module
The height's adjutment module is abnormal, resulting in inaccurate height, lamination, and nozzle scraping platform problems.
¶ 3.Troubleshooting and Solutions:
¶ 3.1 Clean
Clean the nozzle and platform plate and re-level them.
¶ 3.2 Z-axis Compensation
You can fine-tune the Z-axis compensation according to the printing effect when printing the first layer.
¶ 3.3 Refer to the after-sales video to adjust the structure
https://www.crealitycloud.com/post-detail/65b0dd52a5dfec64648b2e80
If the above is still not resolved, please contact customer service cs@creatility.com.