¶ 1. Manual Feeding
1.1 Operating on the machine screen to heat the nozzle to the extrusion temperature of the consumable material.
1.2 Feed the material through the filament
1.3 Apply a slight pressure to extruder clamp, insert the filament into the hole until material flows out from the nozzle.
¶ 2. Semi-automatic Material Feeding (Recommended Method)
2.1 Thread the consumable through the filament breakage detection device.
2.2 Push the filament into the extruder hole until it can't be pushed further.
2.3 Tap on the screen for feeding, observe the nozzle, if the filament has been extruded, then wait for the "feeding completed";
If not extruded, please gently push the filament forward and tap "feed" again.
