¶ Tool：
¶ Operation Steps：
¶ 1. The role of compartments
There are two desiccant compartments in the CFS warehouse to keep the air inside the CFS dry, thereby protecting the filaments from moisture.
¶ 2. Put your fingertips against the small port above the mesh cover and remove it
¶ 3. Remove the mesh cover and take out the desiccant bag which needs to be replaced
¶ 4. Before loading the new desiccant, tear off the outer packing bag, remove the desiccant, and put it back into the compartment in the CFS
.jpg)
¶ 5. The last step is to cover the desiccant compartment with a mesh cover. Insert the bottom side of the mesh cover first, and then push the top in until it snaps into place
¶ 6. Repeat for the other desiccant compartment
Note: The drying bin size is 120mm * 85mm * 20mm. The composition of the desiccant is calcium chloride, which can be purchased but not reused.。