¶ 1. Tools
L-shaped hex wrench
filament inlet
¶ 2. Steps
¶ 2.1 Unplug four PTFE tubes
Remove four screws
¶ 2.2 Pull out the entire filament inlet
Place the entire CFS box upright, manually pull out the entire filament inlet
¶ 2.3 Unplug the cable
Remove the cable cover, unplug the cable from the motor adapter board
¶ 2.4 Remove the entire filament inlet
¶ 2.5 Remove two screws & unplug the cable
Locate the filament inlet that needs to be replaced, unscrew the fixing screws, and remove two cable wires.
¶ 2.6 Remove the filament inlet that needs to be replaced
Remove the filament inlet to be replaced along the direction of the PTFE tube.
¶ Video Tutorial
Replace CFS Independent Filament Inlet Module
https://youtu.be/hjwffUK-iL8