¶
Troubleshooting Other Issues
X-Axis Motion Anomaly Sound
X-Axis Movement Stuttering
Y-Axis Motion Anomaly Sound
Y-Axis Movement Stuttering
Print Layer Texture
Extruder Noise During Printing/Retraction Anomaly Noise
The Print Progress Bar Quickly Ends
The mainboard does not read the card
Screen Artifacting/Graininess
Restart when clicking auto-leveling（Heat and restart）
Solution for the Non-verticality between Gantry and Base
First layer not adhering/Compression layer/Leveling data error (exceeding ±1.2mm)
Unresponsive machine after clicking print
Automatic feeding function abnormality
Motor Does Not Rotate / Homing Failure / X, Y, Z, E Axis Do Not Rotate
Fan does not work/Fan abnormal noise
The machine is stuck on the startup interface/blue screen interface/fail to boot
Large Temperature Fluctuation
Fault Error Analysis (Temperature Issues, Heating Issues, V1.0.6 Leveling Issues, Height Adjustment Issues)
Blue screen after firmware update/How to determine if the firmware update was successful/Firmware upgrade failure
Motor Abnormal Noise
The Model Is Difficult To Remove / The First Layer Is Too Sticky And The Model Cannot Be Removed
Leveling Failure Or Height Adjustment Failure(Applicable for versions below 1.0.6)
//