¶ 1. Connect the Device:
Connect the device to the computer via a data cable and plug in the power supply.
¶ 2. Set Parameters:
Select "Face" mode, select "Geometry" for Feature, and click “Scan”.
¶ 3. Point Cloud Preview:
Aim the scan at the face and keep a moderate distance, observe the preview model to see if the point cloud is complete. If the point cloud is sparse, adjust the exposure to obtain a more complete point cloud.
¶ 4. Start Scanning:
Click the "Start/Pause" button on the machine to start scanning and collect data from all angles.
Front Data
Left Data
Right Data
Upper Data
Lower Data
¶ 5. Data Processing:
Click the "End Scan" button and enter the processing module.
Set the resolution and sensitivity in "Optimization Settings", and then click the icon to process.
Click "Mesh" to encapsulate data.
Click "Color Mapping" to perform texture processing.
¶ 6. Model Effect Display:
